thermital AF ACS 220 B, Operating And Installation Instructions

Page: 35 / 48

ENGLISH
35
Electrical connections
AF ACS B must always be connected to the electrical power supply in a separate manner compared to the connection
of the outdoor unit.
General
• The acceptable voltage variation is: ± 10% during operation.
• The electrical connection conduits must be fixed.
• Class 1 unit.
Power supply
• The power supply must come from an isolation and electric protection device (not supplied) in accordance with existing
regulations.
• The installation must be protected by a double-pole circuit-breaker (not included).
Remove the front panel by the same approach of the base part.
There are no screew to be removed and no wire to be disconnected.
After you removed the front panel you will see the tank and in the bottom right part,
you will see the cover of electrical connections.
COUPLING SPACE COVER LID, OPENING:
OPEN THE SCREW HOLDING THE LID.
LIFT THE LID AND PULL IT TO THE RIGHT.
NOTE! APPLIANCE FRONT SHEET AND COVER LID OF
COUPLING SPACE MUST BE FASTENED SECURELY
ON THERE PLACE WHEN THE APPLIANCE IS
OPERATIONAL.