thermital AF ACS 220 B, Operating And Installation Instructions

Page: 30 / 48

ENGLISH
30
How to install AF ACS B
AF ACS works only with an outdoor unit; it is commonly connected to the proper EMX port.
Anyway in emergency conditions, you can use AF ACS B as electrical water heater without the heat pump.
As first step you have to remove the bottom cover simply by your hand; it is not fixed by screw and you have only to
pickup it by the basement.
1. Control panel
2. Main switch
(selector switch)
3. Thermostat
(locked to 85 °C)
4. Cold water inlet
5. Hot water outlet
6. Solar coil inlet
7. Solar coil outlet
Detaching bottom sheet
Bottom front sheet is detached by pulling the sheet from
bottom end. When the sheet is partially open, pull the sheet
downwards.