Explanation
AUX. HEAT 2
Shows the number of hours that the immersion heater step 2 has been in
operation. (Step 3= Step 1 + step2)
HOT WATER
Shows the number of hours that hot water has been produced.
Default settings in the control unit
The left column in the table below shows the parameters that can be adjusted by the user.
The middle column shows the factory settings.
The right column shows the settings made by the installer when the heat pump was installed.
Parameter
Factory setting
Any customer-specific settings
Heat curve
40/30°C
Min desired system
supply temp.
20°C
Max desired system
supply temp.
60/45°C
Heating - Seasonal
stop
17°C
User Guide
Thermia Legend
BWLE01UG0102
Thermia AB
16
