background image

-  - 

18

WARRANTY 

 

THERMAL ZONE

 warrants the accompanying split air conditioner or heat pump system to be free of 

defects in material and workmanship for the applications specified in the operation manual and 
installation manual for a period of one (1) year on parts and five (5) years on compressor, valid from 
the date of original retail purchase in the United States or Canada. Labor is not covered under 
warranty. 
 
If the unit exhibits a defect in normal use and is determined to be within the warranty period, 

THERMAL ZONE

 will, at its option, either repair or replace the unit free of charge within a reasonable 

time after the unit is returned.  
 
This warranty 

DOES NOT

 cover: 

z

  Damage, accidental or otherwise, to the unit while in possession of the consumer that is not a 

result of a defect in material in workmanship. 

z

  Damage caused by consumer misuse, tampering, or failure to follow all care and maintenance 

instructions in the manuals. 

z

  Damage to the finish of the case or other parts caused by water. 

z

  Damage caused by repairs or alterations to the unit by anyone other than a qualified technician. 

z

 Filter. 

z

  Freight and Insurance cost for the warranty service. 

 

Warranty Activation Card must be completed and sent in to activate the warranty for the 
accompanying unit. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for MS212A13115A






















Reviews: