1751 Hurd Drive ● Irving, Texas 75038 ● (972) 580-0200 ● (888) 580-0202 ● Fax (972) 580-0277
URL: www.thermal-edge.com ● Email:
SP-ENG-211-000-17 Rev 1.7
12
|
P a g e
Open Door Kill Switch
This option provides you with an adjustable and mountable safety switch for your electronics
enclosure. This switch will disable power to the air conditioner when your electronics enclosure door is
open allowing you to work on your enclosure without the risk of unintentionally powering the unit.
Adjustable Temperature Probe
The adjustable temperature probe provides you with a 12
’ temperature probe that can be installed
anywhere in your enclosure. This allows you to have the flexibility to monitor and maintain the
temperature at any specific location of your enclosure.
EtherNet/IP Controller Output
This option provides the ability to communicate with the Thermal Edge Air Conditioner controller via
the Ethernet/IP protocol. You can monitor and control all settings from a remote location with an
applicable Allen Bradley/Rockwell PLC. A DIN rail is required inside the electrical enclosure for
mounting the communication components.
Full specifications will be provided with this option. For full details refer to the Ethernet/IP Option
Specifications included with the Air Conditioner.
Remote Controller
When having our Programmable Digital Controller on the face of our Air Conditioner does not fit your
application, Thermal Edge offers the Remote Controller option. This option moves the controller into
yo
ur enclosure using a 10’ cable along with a universal, 16 gauge powder coated steel mounting
bracket. The Air Conditioner will have no openings on the face of the unit. Below is partial schematic
showing the remote controller option wiring connections to the digital controller.
Note:
The Remote Controller option is required for high pressure wash-down applications.
Cold Air Outlet Extension
The TM061 and TM081 can be ordered with the cold air supply outlet located approximately 30 inches
from the return air inlet, instead of approximately 20 inches, by use of an extended air duct.
