Thermal Dynamics Ultra-Cut 400, Operation Manual

Page: 1 / 178

Manual No. 0-5164 rev AG
Manual Assembly Instructions
- Separate this sheet from the rest of the manual.
- Locate and remove 'Page 1' of this manual. Follow the directions on 'Page 1'.
- Locate the set of tabs for this manual.
- Locate the torch information section, which will become section 8 of this manual.
- Find the sheets saying 'Insert Section ___ tab here. Discard this sheet'. Insert the appropriate tabs
and discard the 'Insert Section ___ tab here. ' sheet.
- At Section 8, insert the torch information section.
-Insert the assembled manual sections and tabs into the 3-ring binder.
- Keep this manual with the power supply for installation, operation, maintenance, and replacement parts
information.
OPTIONAL:
Copy Section 8 (torch operational data) for operator convenience. This section includes data that will be
needed repeatedly for system operation, depending on the metal to be cut and the gases in use.
- Discard this sheet.
NOTE:
Power supply schematics are provided separately. The system operator may want to keep them with this
book or in a separate location.