15
3.0 INSTALLATION RECOMMENDATIONS
3.01 Environment
The Pro-Lite 250TS is designed for use in hazardous environments.
Examples of environments with increased hazardous environments are -
a.
In locations in which freedom of movement is restricted, so that the operator is forced
to perform the work in a cramped (kneeling, sitting or lying) position with physical
contact with conductive parts;
b.
In locations which are fully or partially limited by conductive elements, and in which
there is a high risk of unavoidable or accidental contact by the operator, or
c.
In wet or damp hot locations where humidity or perspiration considerably reduces the
skin resistance of the human body and the insulation properties of accessories.
Environments with hazardous environments do not include places where electrically conductive
parts in the near vicinity of the operator, which can cause increased hazard, have been
insulated.
3.02 Location
Be sure to locate the welder according to the following guidelines:
•
In areas, free from moisture and
dust.
•
Ambient temperature between 0 degrees
C to 40 degrees C.
•
In areas, free from oil, steam and
corrosive gases.
•
In areas, not subjected to abnormal
vibration or shock.
•
In areas, not exposed to direct
sunlight or rain.
•
Place at a distance of 12” (304.79mm) or
more from walls or similar that could
restrict natural airflow for cooling.
WARNING 3
Thermal Arc advises that this equipment be electrically connected by a qualified
electrician.
Summary of Contents for 250TS DC CC
