English 12
Mounting Anti-Tip Bracket
The floor mounted bracket shall be installed as follows:
1.
Place bracket on floor in position shown in
Figure 8
.
•
30” and 36” bracket may be used in either corner of
the installation area.
2.
Secure to floor and wall stud using the (4) 1½” (38 mm)
Phillips head screws provided.
3.
Later, when the unit is installed, the adjustable leg will
slide under the bracket, as shown in
Figure 9.
4.
If the range is moved to a new location, the Anti-Tip
Device must be removed and reinstalled.
Figure 8: Placement of Anti-Tip Bracket
Y
5DQJH
6LGH
'LVWDQFHIURP
(GJHRI5DQJH
/HIWRU5LJKW
òPP
/HIWRU5LJKW
ôPP
5LJKW
òPP
/HIW
óPP
5PQ7JFXPG#SBDLFU
Y
$-
Figure 9: Anti-Tip Bracket
Summary of Contents for Professional Pro Harmony PRG304GH
Page 2: ......
