Installation Instructions English | 20 |
Installing Grease Trays, Filters
and Spacers
1. Remove all plastic from hood pieces.
2. Insert in the following order:
1)
Grease Tray
— Push up and in over the rear lip.
2)
Filters
— Slide filter over the front lip. Push filter
rear up, then slide back over rear lip (
Figure 32
).
3)
Filter Spacer
— Insert these the same way as the
filters.
3. Reverse the above directions to remove the grease
tray, filters and filter spacer.
NOTE:
Do not use cooktop while hood is disassembled.
Grease trays must be in place before installing the filters.
Heat Lamp Installation
•
Turn heat lamp clockwise to install (
Figure 33
).
•
Replace lamp with either a PAR-38 175W heat lamp or
a PAR-40 250W heat lamp.
Refer to the Use and Care Guide for additional information.
1 – Filter Spacer
2 – Filter
3 – Grease Tray
4 – Grease Tray Trough
Figure 30: Hood and Parts
Figure 31: Grease Tray
1
2
3
4
Figure 32: Filters
Figure 33: Heat Lamp Replacement
1
2
3
