Thermador Masterpiece CET366YB, Use And Care Manual

Page: 10 / 72

en-us
Operation
10
4.3 Cooking zones
Here you can find an overview of the cooking zones avail-
able on your cooktop. Place the cookware on the cooking
zone that best matches its size.
When a cooking zone is active, the corresponding displays
light up.
Refer to the overview of models and dimensions.
→ Page 2
Symbol Cooking zone Function
Single cooking zone Only one cooking zone size is available.
Dual cooking zone Two cooking zone sizes are available.
→
"Using the dual cooking zone", Page 11
Triple cooking zone Three cooking zone sizes are available.
→
"Using the triple cooking zone", Page 11
Bridge zone The bridge zone combines two cooking zones to a long griddle zone.
→
"Using the bridge zone", Page 11
Note: Do not use cookware larger than 17" x 10" (430 x 250 mm).
Notes
¡
The cooking zone regulates the temperature by
switching the heat on and off. The heat may also switch
on and off when on the highest power level.
–
This protects components from overheating.
–
The appliance is protected from electrical overload.
–
Better cooking results are achieved.
¡
For cooking zones with more than one heating element,
the different sections of the cooking zone may turn on
and off at different intervals.
Operation
5 Operation
Operation
Here you will find everything you need to know about op-
erating your appliance.
5.1 Turning the cooktop on
▶
Press ON I OFF .
a
lights up in the cooking zone displays.
5.2 Turning the cooktop off
▶
Press ON I OFF .
a
The indicator above ON I OFF turns off.
a
The displays turn off.
a
All cooking zones are turned off.
a
The residual heat indicators remain lit until the cooking
zones have cooled off sufficiently.
Note: The cooktop turns off automatically when all the
cooking zones have been turned off for more than 20 sec-
onds.
5.3 Cooking zone settings
In order to make settings on a cooking zone, the cooking
zone has to be selected.
Set the desired power level for each cooking zone in the
settings area.
Setting Power level
lowest power level
highest power level
Setting Power level
Intermediate setting for all power levels
The intermediate setting is displayed as a dot
in the cooking zone display, for example .
lights up when you set the intermediate level
between power level and ⁠.
Setting the power level
Requirement: The cooktop is turned on.
1.
Press to select the cooking zone ⁠.
a
lights up in the cooking zone display.
a
lights up under the cooking zone display.
2.
Set the power level in the settings area ⁠.
Press to set an intermediate level.
Changing the power level
1.
Press to select the cooking zone.
2.
Set the power level in the settings area.
Turning the cooking zone off
1.
Press to select the cooking zone.
2.
Select in the settings area.
a
The residual heat indicator lights up after approximately
10 seconds.