9
Press and hold down the function button (for
approx. 3 seconds) to set the Therm-ic Boot
Integrated System to the lowest heating level. If
the button is pressed for more than 6 seconds,
the boots will go into safety mode and switch off.
Adjustment:
Pressing the function button once (for approx.
1 second) will increase the heating setting
(level 1, level 2 or level 3).
> Level 1: 1 flash, low heating setting.
> Level 2: 2 flashes, medium heating setting.
> Level 3: constant light, high heating setting. If
standby mode has been activated, you will first
need to wake up the system.
STANDBY mode:
If the button is not pressed for 10 seconds, it will
go into standby mode. Pressing the function
button (for approx. 1 second) will wake up the
device, returning it to the last heating level set.
OFF:
To switch off the Therm-ic Boot Integrated
System, press and hold the function button (for
3 seconds, until the heating level indicator light
switches off).
IMPORTANT USAGE ADVICE
• Charge the batteries before each use.
• Then, re-connect the battery to the boot (by
clipping on the plug). When switching on
the Therm-ic Boot Integrated System, do not
leave them set to level 3 for more than a few
minutes; continuous use at this setting risks
raising the temperature excessively and may
cause burns.
•
Always set the Therm-ic Boot Integrated
