7
USB charger (spare part available from Therm-ic)
USB charger*
Input 5V / 2A
Output 4,2V /
1A x 2
Optional universal
charger* (en
option) DC 5V /
2A (with adaptors
for use in different
countries)
Input 110V -
240V ~
(50 - 60 Hz) max.
300 mA.
Output 5V /
2000 mA.
"Dual" Lithium
batteries*
3,7V / 2600 mAh
* spare parts available from Therm-ic
ACTIVATING AND CHARGING THE BATTERIES
The batteries must be charged before first use.
1. Plug in the USB cable. The charge indicator
light (2.1) will light up green. Next, plug
the two boot connectors in to the charger.
The Boot Integrated System can be in any
mode at the start of charging. Charging will
start automatically and the charge indicator
light (2.1) turns red and remains on during
charging.
2.
When the batteries are fully charged,
charging will stop automatically and the
LEDs in the charge indicator light (1.2) will
turn green again.
3.
Unplug the two Boot Integrated System
connectors from the USB charger.
4.
Connector trap on the Boot Integrated
System.
During and after charging, the Boot Integrated
System remains in the mode in which it was set
before charging.
It is recommended that you switch OFF
the Boot Integrated System during and
