Theralux TVS PRO, Installation And Operation Manual, Page: 10 / 15

Page 10 of 15
WHEN USING WITH THERALUX / POOL+ MANAGER CONTROLLER WITH RS485 COMMUNICATION

Press and hold OFF button for 10secs

Screen will display P 3 -- Press SET

Screen will display 2850 -- Press SET

Screen will display -- Mod Off
o
Press Up or DOWN arrows
o
Screen will display Mod On - Press SET

Plug cable into pump from controller

When connect screen should display “----” It is now in slave mode
WHEN USING WITH THERALUX ECOMMANDER

Priming function must be disabled prior to connecting communication plug to motor
o
Press the stop button 3 times simultaneously
o
Screen should read “P off”
o
Do this again to turn it on, “P on”

Set speeds prior to connecting communication plug to motor
o
Adjust eco and solar heat demand speed, then save prior to connecting comms
cable
 Plug comms cable into pump from controller