Themis RES-11XR3, Installation Manual

Page: 74 / 140

0
3-6
Themis Computer
RES-11XR3 Installation Manual
3.2.1.5 PS/2 Mouse Support
Select Enabled to enable PS/2 Mouse support. Select Auto (default) to enable the
onboard PS/2 mouse when a PS/2mouse is detected. The options are Enable, Dis-
abled, and
Auto (default).
3.2.1.6 Wait For 'F1' If Error
This forces the system to wait until the 'F1' key is pressed if an error occurs. The
options are Disabled and
Enabled (default)
3.2.1.7 Hit 'Del' Message Display
This feature displays “Press DEL to run Setup” during POST. The options are
Enabled (default) and Disabled.
3.2.1.8 Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and
Disabled (default).
3.2.1.9 Power Button Function
This setting allows you to decide if the power button will instantly turn the system
off, or wait 4 seconds to turn off while the button is depressed. The options are 4
Seconds Override and
Instant Off .
3.2.1.10 Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for the
system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last state before a power loss. The options are Power-On, Power-Off and
Last State (default).
3.2.1.11 Interrupt 19 Capture
Interrupt 19 is the software interrupt that controls the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will “capture” Interrupt
19 at boot and allow the drives that are attached to these host adaptors to function as
bootable disks. If this item is set to Disabled, the ROM BIOS of the host adaptors
will not capture Interrupt 19, and the drives attached to these adaptors will not func-