Themis RES-11XR3, Installation Manual

Page: 107 / 140

Themis Computer
Rack-Mount Slide Installation
B-3
B
.
Figure B-2. RES-11XR3 Rack-Mount Slide Installation
Front
Attach the front (short) slide bracket
to the outside slide section with screws,
Outside slide section
washers, and nuts (included in slide kit)
Attach the rear (long) slide bracket
to the outside slide section with screws,
washers, and nuts (included in slide kit)
Attach both inside slide sections to the left and right sides of
the RES-11XR3 chassis with #8-32 screws (included in slide kit)
Note: Graphic shown above is for slide placement only; chassis shown is not an accurate representation of the RES-11XR3.
440.8 339.2 250.6 202.4 149.1 85.6 37.6
Front
0
424.9 24.9
1
3
A
Side View of the RES-11XR3 Slide Installation
B
RES-11XR3 Rack-Mount Slide Installation
Note: All Dimensions are given in millimeters (mm).
2
4