Themis RES-11XR3, Installation Manual

Page: 39 / 140

Overview and Specifications
System LEDs and I/O Connectors
1-13
Themis Computer
Table 1-5. Rear-Panel I/O Connectors
Connector Description
PS/2 Mouse z 6-pin mini-DIN connector to attach a PS/2 mouse device.
PS/2 Keyboard z 6-pin mini-DIN connector to attach a PS/2 keyboard device.
USB 0 and USB 1
Hi-Speed USB 2.0
Serial Ports
z Two 4-pin USB connectors to attach serial devices to USB port 0 and
USB port 1.
Note: Six additional USB ports (USB 2 through USB 7) can be access-
ed directly from the motherboard.
COM 1 Serial Port
z One DB9 (male) connector on rear panel to attach a serial device to
COM 1port
A second serial port (COM 2) can be accessed directly from the
motherboard.
VGA Graphics Con-
nector
z One 17-pin VGA connector to provide a video and CRT display
Ethernet LAN Ports
z Standard RJ45 connector to attach one or two gigabit Ethernet LAN
line(s)—LAN 1 and LAN 2.
IPMI Dedicated
Ethernet LAN Port
z Standard RJ45 connector to attach a dedicated IPMI LAN line with
full KVM support (X8STi-F and X8STi-3F only)
Unit Identifier (UID)
Switch
z A Unit Identifier Switch and two LED indicators are located on the
motherboard. When the UID switch is pressed, both LEDs are turned
on (one LED is located at the rear edge of the motherboard, the other
LED is at the front of the motherboard). Pressing the UID again turns
off both LED indicators. The UID indicators provide an easy identifi-
cation of a system unit that may be in need of service.
Note: The UID can also be triggered via IPMI.