67
Password on Target
Server
The password for the username on the target server.
Test Connection
Click to check the connection to the Target Server.
Schedule
Enable or Disable schedule backup of your share folders.
Time
The time when the Nsync task will run.
Type
Select whether to run the Nsync task daily, weekly, or monthly.
Daily
: input the time of day to execute Nsync task.
Weekly
: input which day of the week to execute the task.
Monthly
: decide which day of the month to execute the task.
Add
Press
Add
to submit your settings.
Setting Up an Nsync Target on an Nsync Device
On the Nsync target server, the administrator of that server has to set up a user
account with a folder named “nsync” and grant write access.
1.
On the Nsync server, add a user for Nsync source (ex. nsyncsource1). For
instructions on how to add a user on the N0204, see
Chapter 4: User and
Groups Authentication> Local User Configuration >
Add Users
.
2.
On the Nsync server, grant that user (ex. nsyncsource1) write access to the
nsync
folder. For instructions on how to set up a folder’s ACL, see
Chapter 4: Storage management> Shore Folder>
Folder Access
Control List (ACL)
.
3.
Once this is done, the target server will start accepting Nsync tasks from
server using that ID and password.
Setting Up an Nsync Target on Another Device
If you selected “Other Device” when setting up your Nsync task, the N0204 will use
the FTP protocol to back up the share folder. On the external storage device, make
sure there is a folder named “nsync”, and the Auth ID has writable permission in
that folder.
Designating N0204 as an Nsync Target
The N0204 can act as an Nsync server, enabling another Nsync-equipped Thecus
NAS at a remote location backup their files to this N0204. From the
System
Network
menu, choose the
Nsync Target
item, and the
Nsync Target Server
screen appears.
Nsync Target Server Setting
Item
Description
Nsync Target Server
Enable or Disable Nsync Target support.
NOTE
Before starting an Nsync Task, make sure the target server’s Nsync Server (or FTP
Server) is enabled.
NOTE
To enable Nsync task to go through a firewall, you have to open port
TCP/1194 on your firewall in both directions.
