19
USB Copy
The USB Copy function enables you to copy files stored on USB devices such as USB
disks and digital cameras to the N0204 miniNAS by press USB copy button. To use
USB copy, follow the steps below:
1.
Plug your USB device into USB2.0 port on the Front Panel.
2.
Press USB copy Button and the N0204 miniNAS will start copying USB disks
connected to the front end USB2.0 port.
3.
The USB LED show
Blinking Green:
Copy activity.
Solid Green:
Copy Success.
Solid Red:
Copy Fail.
Typical Setup Procedure
From the Web Administration Interface, you can begin to setup your N0204 for use
on your network. Setting up the N0204 miniNAS typically follows the five steps
outlined below.
For more on how to use the Web Administration Interface, see
Chapter 4:
Web Administration Interface
.
Step 1: Network Setup
From the Web Administration Interface, you can configure the network settings of
the N0204 miniNAS for your network. You can access the
Network
menu from the
menu bar.
For details on how to configure your network settings, refer to
Chapter 4:
System Network
.
Step 2: RAID Creation
Next, administrators can configure their preferred RAID setting and build their RAID
volume. You can access RAID settings from the menu bar of the Web Administration
Interface by navigating to
Storage Management > RAID Configuration.
For more information on configuring RAID, see
Chapter 4: System Management >
RAID Configuration
.
USB 2.0 Copy
NOTE
Please use the front USB port when
using USB copy function.
