![background image](http://html1.mh-extra.com/html/thecus/i8500/i8500_user-manual_1101392050.webp)
- 50 -
1. Select
“/ Volume configuration / Physical disk”
.
2. Mouse moves to the gray button next to the PD slot; click
“Set Free
disk”
.
Step 10:
Done, all volumes have been deleted.
3.7 Enclosure management
“Enclosure management”
allows managing enclosure information including
“SES configuration”
,
“Hardware monitor”
,
“S.M.A.R.T.”
and
“UPS”
. For the
enclosure management, there are many sensors for different purposes, such as
temperature sensors, voltage sensors, hard disks, fan sensors, power sensors,
and LED status. Due to the different hardware characteristics among these
sensors, they have different polling intervals. Below are the details of polling time
intervals:
1. Temperature sensors: 1 minute.
2. Voltage sensors: 1 minute.
3. Hard disk sensors: 10 minutes.
4. Fan sensors: 10 seconds . When there are 3 errors consecutively,
controller sends ERROR event log.
5. Power sensors: 10 seconds, when there are 3 errors consecutively,
controller sends ERROR event log.
6. LED status: 10 seconds.
Figure 3.7.1
3.7.1 SES
configuration
SES
represents
S
CSI
E
nclosure
S
ervices, one of the enclosure management
standards.
“SES configuration”
can enable or disable the management of SES.
The SES client software is available at the following web site:
SANtools:
http://www.santools.com/
Summary of Contents for i8500
Page 1: ...1 Thecus i8500 iSCSI RAID SYSTEM User Manual...
Page 86: ...86 H M B Diagram...