background image

- 37 - 

“Migrate”

 

Æ

 the RAID group is being migrated.

 

“Scrub”

 

Æ

 the RAID group is being scrubbed. 

Health 

The health of RAID group.

 

“Good”

 

Æ

 the RAID group is good. 

“Failed”

 

Æ

 the hard drive is failed. 

“Degraded”

 

Æ

 the RAID group is not completed. The 

reason could be lack of one disk or disk failure.

 

 

RAID 

The RAID level of the RAID group. 

Enclosure 

RG locates on local or JBOD enclosure. 

 

RG operations description: 

Create 

Create a RAID group. 

Migrate 

Migrate a RAID group. Please refer to next chapter for 
more detail. 

Activate 

Activate a RAID group; it can be executed when RG 
status is offline. This is for online roaming purpose. 

Deactivate 

Deactivate a RAID group; it can be executed when RG 
status is online. This is for online roaming purpose. 

Scrub 

Scrub a RAID group. It’s a parity regeneration. It 
supports RAID 3 / 5 / 6 / 30 / 50 / 60 only. 

Delete 

Delete a RAID group. 

Set disk 
property 

Change the disk status of write cache and standby. 
Write cache options:

 

“Enabled”

 

Æ

 Enable disk write cache. 

“Disabled”

 

Æ

 Disable disk write cache. 

Standby options:

 

“Disabled”

 

Æ

 Disable spindown. 

“30 sec / 1 min / 5 min / 30 min”

 

Æ

 Enable hard drive 

auto spindown to save power in the period of 
time. 

More 

Show RAID group detail information. 

Summary of Contents for i8500























































































Reviews: