background image

- 22 - 

3.4.3 Login 

setting 

 

“Login setting”

 can set single admin, auto logout time and Admin/User 

password. The single admin can prevent multiple users access the same 
controller at the same time. 
 

1. 

Auto logout:

 The options are (1) Disable; (2) 5 minutes; (3) 30 minutes; 

(4) 1 hour. The system will log out automatically when user is inactive 
for a period of time. 

2. 

Login lock:

 Disable/Enable. When the login lock is enabled, the 

system allows only one user to login or modify system settings. 

 

 

Figure 3.4.3.1 

 

Check 

“Change admin password”

 or 

“Change user password”

 to change 

admin or user password. The maximum length of password is 12 characters. 
 

3.4.4 Mail 

setting 

 

“Mail setting”

 can enter at most 3 mail addresses for receiving the event 

notification. Some mail servers would check 

“Mail-from address”

 and need 

authentication for anti-spam. Please fill the necessary fields and click 

“Send test 

mail”

 to test whether email functions are available. User can also select which 

levels of event logs are needed to be sent via Mail. Default setting only enables 
ERROR and WARNING event logs.  
 

Summary of Contents for i8500























































































Reviews: