3
Setting the brightness (LUX)
¾
Turn the potentiometer towards „Moon“; the LED spotlight
only switches on when it is relatively dark.
¾
Turn the potentiometer towards „Sun“; the LED spotlight
switches on when it is relatively bright
¾
Turn the potentiometer to „Sun“, and the device works
independent of brightness
Setting the time (TIME)
¾
Set the potentiometer to the desired time (2 s–30 min)
Function mode (MODE)
¾
Turn the potentiometer to „auto“; the LED spotlight swit
-
ches on when there is motion in the dark
¾
Set Potentiometer to „10 %“ : LED spotlight switches to the
set dimming value when dark
¾
(10 % – 50 %) for for movement to 100 %.
Manual operation
The lighting can be switched on manually via a circuit breaker
button.
L
A circuit breaker button must be connected
L
Function only possible at night
N
L
N
L
¾
Quickly confirm Circuit breaker 2 x (within 2 s)
▻ The lighting remains switched on for 6 hours.
¾
To switch off the lighting and return to auto mode, press
the circuit breaker briefly (within 2 s)
¾
If the circuit breaker is pressed x2 during this six second
turn-on time, the lighting is switched on again for 6 hours.
7. Walking test
The walking test is used to test the detection area and to
restrict it if necessary.
¾
Set potentiometer „brightness“ to „sun“.
¾
Set the time potentiometer (TIME) to „test“.
▻ The motion detector now always reacts to
movements (independent of brightness).
¾
Walk through the detection area at a right angle. After the
motion detector has detected a movement, it switches on
for 2 s.
L
Pay attention to the direction of motion during the test.
8. Aligning the LED spotlight
theLeda S10
Down 60°
Down 70°
Left & Right 40° (limited by wall )
40°
40°
Left: 90° (limited by corner) & Right: 45°
- with corner bracket
45°
45°
Left: 210° & Right: 45° - with spacer
45°
210°
Left: 210° & Right: 45° - with corner bracket
45°
210°
theLeda S20
70°
