Theben termina tr 611 top2, Manual

Page: 32 / 93

Page | 32
With the ◄ and ► push buttons enter the hour for the cycle program end (5:00 pm), then
press the OK push button.
With the ◄ and ► push buttons enter the minutes for the cycle program end (00
minutes), then press the OK push button.
Proceed to select the weekday on which the cycle program is to end. In the example
scroll to Friday using the ► push button.
Confirm by pressing OK.
The return to the NEW menu now takes place.
Now other cycle programs can be entered (OK push button). With the ► push button it is
possible to scroll to the END or with the MENU (ESC) push button the menu can be
exited.
Notes:

The programmable pulse and pause duration is limited respectively to a maximum of 17 hours 59
minutes and 59 seconds.

Cycle programs entered must not overlap each other with regard to time.
Example: A cycle program runs from Monday 9:00 am to Friday 5:00 pm and cycle program 2
should run on the same channel from Thursday 10:00 am to Sunday 3:00 pm.
If an overlap is detected, ERROR is displayed and the additionally programmed cycle program
entered is not saved.