Theben termina tr 611 top2, Manual

Page: 30 / 93

Page | 30
With the MENU push button request the main menu from the auto mode.
Confirm the PROGRAM menu by pressing OK.
Press OK button.
Press push button ► until CYCLE appears on the display and confirm with the OK push
button.
With the ► button select the desired channel and then press OK (only for the 2-channel
devices).

Brief fade-in of the number of free memory locations
Step 1: START CYCLE
Confirm START CYCLE with the OK push button in order to start the input of the time for
the start of the cycle program.
With the ◄ and ► push buttons enter the hour for the cycle program start (9:00 am), then
press the OK push button.
With the ◄ and ► push buttons enter the minutes for the cycle program start (00
minutes), then press the OK push button.
Note:
The start of a cycle program can only occur at the minute start since in this case no seconds can be
selected for the start.
Proceed to select the weekday on which the cycle program is to start.Therefore in the
example, select Monday and confirm with the OK push button.