3
L
You can either change or delete a block, i.e. a switching
time copied for several days (e.g. Mon-Fri) or a single
switching time
Change individual switching times
Press MENU
Select PROGRAM and press OK to confirm
Select CHANNEL C1 or C2, confirm with OK
Select MODIFY, confirm by pressing OK
Select day, confirm with OK
MODIFY HOUR, use the + or – buttons to change hour and
minute and confirm with OK.
To change several switching times, select MODIFY BLOCK,
confirm with OK
Delete switching program
DELETE
ALL
SINGLE
MENU
PROGRAM
u
u
CHANNEL C1
MONDAY
DELETE
SINGLE DAY
DELETE
BLOCK
NEW
CHECK
MODIFY
DELETE
u
u
L
You can either delete a block, i.e. a switching time copied
for several days (e.g. Mon-Fri) or a single switching time
Press MENU
Select PROGRAM and confirm with OK
Select CHANNEL C1 or C2, confirm with OK
Select DELETE, confirm with OK
INDIVIDUAL is displayed (with
u
DELETE ALL),
confirm with OK
MONDAY is displayed, confirm with OK
Select DELETE BLOCK, confirm with OK
With
u
DELETE MONDAY etc. individual days can also be
cleared.
Activating PIN code
The PIN code is set in OPTIONS via the menu.
L
If you have forgotten your PIN, call the Theben Hotline.
L
Have the serial number ready.
OPTIONS
NO PIN
WITH PIN
CURRENT
PIN
NEW PIN
00 00
LANGUAGE
PIN
FACTORY
SETTINGS
INFO
END
u
u
MENU
Setting manual or permanent switching
Manual or permanent switching can be set via the automatic
screen by button combination (see picture).
•
Manual control:
Reversing the channel status to the next automatic or
programmed switching.
•
Permanent switching:
As long as a permanent switching (on or off) is activated,
the programmed switching times are ineffective
ok
Channel
C1
Channel
C2
Activating manual control
Briefly press both buttons simultaneously
Activating permanent switching
Press both buttons simultaneously for 2 seconds
Cancelling manual/permanent switching
Press both buttons simultaneously
Resetting the time switch
Press the 4 buttons simultaneously
▻ You can choose between KEEP PROGRAM and DELETE
PROGRAM
6. Technical data
Operating voltage:
230 V AC +10 % / –15 %
Frequency:
50–60 Hz
Standby:
0,55 W (6010130)
0,8 W (6020130)
Max switching capacity:
6010130:
16 A (bei 250 V, cos
ϕ
= 1)
6020130:
max. 16 A (with mains-frequency 50 Hz)
max. 12 A (with mains-frequency 60 Hz)
Switching capacity:
2 A (at 250 V, cos
ϕ
= 0,6)
Min. switching capacity:
10 mA/230 V AC
100mA/ 24 V AC/DC
Switch output:
switching of any phase is permitted
Shortest switching time:
1 min
Switching accuracy:
accurate to the second
Protection rating:
IP 20 in accordance with EN 60529
Protection class:
II in accordance with
EN 60730-1 subject to designated
installation
Operating temperature:
– 30 °C … + 55 °C
Power reserve:
48 hours, rechargeable
Time accuracy (typical):
± 0,5 s/day (25 °C)
Rated impulse withstand voltage:
4 kV
Pollution degree:
2
Software:
class A
Contact:
NO contact
Glow lamp load:
2600 W
Halogen lamp load:
2600 W
