background image

Table of Contents

1

Designated Use .................................................................... 15

2

Safety Instructions............................................................... 15

3

Description and Mounting................................................... 16

3.1 Device Overview .................................................................... 16
3.2 Mounting and Electrical Connection....................................... 17

4

Installation and Operation................................................... 18

4.1 Carrying out a Reset .............................................................. 18
4.2 Inserting or Exchanging Batteries (only

RAMSES

®

811 top

) 18

4.3 Selecting the Language ......................................................... 18
4.4 Setting the Time / Date .......................................................... 18
4.5 Selecting the Temperature Profile.......................................... 19
4.6 Checking Current Room Temperature and Settings -

Info Button.............................................................................. 19

4.7 Temporarily Changing the Target Temperature..................... 20
4.8 Early Cancellation, Check or Clearance of the

Holiday Program .................................................................... 20

4.9 Party / Eco Program............................................................... 21

5

Programming........................................................................ 21

5.1 Setting the Holiday Program .................................................. 21
5.2 Changing the Settings for Target Temperatures.................... 22
5.3 Program P3 ............................................................................ 22
5.4 Service Settings ..................................................................... 25
5.5 Time/Date and Summer/Winter Time..................................... 27

6

Maintenance and Repair...................................................... 28

7

Disposal ................................................................................ 28

7.1 Disposal of Batteries .............................................................. 28
7.2 Disposal of the Device ........................................................... 28

8

T

h i

l D

28

1

Designated Use

The

RAMSES

®

811/812 top

is a digital clock thermostat

ling the room temperature.

The room thermostat

RAMSES

®

811/812 top

is intended

and room temperature-dependent on and off switching of a
load with a maximum current consumption of 6 A, such a
tion pump, a burner or a motor mixing valve. It must only
dry rooms with impurities that are usual for flats or house

Designated use also includes adherence to the operating
ing instructions. Any other usage is not allowed. The man
cannot be held liable for damages resulting from this.

2

Safety Instructions

The connection and installation of electrical dev
only be carried out by a qualified technician.

The national regulations and respective safety
tions are to be observed.

Interferences and changes to the device will le
cellation of the warranty.

Table of Contents

1

Designated Use. . …………………………...…….……………..20

2

Safety Instructions. . …………………………………………....20

3

Description and Mounting…………………………………… . 21

3.1

Device Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.2

Mounting and Electrical Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . 23     

3.2.1 Room thermostat RAMSES

®

813 top . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.2.2 Connection examples RAMSES

®

813 top  . . . . . . . . . . . . . . . . . . . . . . . 24

4

Installation and Operation   . . . . . . . . . . . . . . . . . . . . . . . . . . .24

4.1

REC 1 / REC 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

4.1.1 Positioning the antenna  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

4.1.2 Optimising reception quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

4.1.3 Pre-selection setting REC 1/REC 2  . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

4.1.4 Verifying codes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

4.1.5 Clearing codes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

4.1.6 Recoding  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

4.1.7 Response to a fault . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4.2  Inserting or Exchanging Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4.3

Selecting the Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.4

Setting the Time/Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.5

Selecting the Temperature Profile  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.6

Checking Current Room Temperature and Settings -
Info Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

4.7

Temporarily Changing the Target Temperature . . . . . . . . . . . . . . . . . . . 28

4.8

Early Cancellation, Check or Clearance of the
Holiday Program  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

4.9

Party/Eco Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5

Programming  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.1

Setting the Holiday Program  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.2

Changing the Settings for Target Temperatures  . . . . . . . . . . . . . . . . . . 30

5.3

Program P3  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.4

Service Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.5

Time/Date and Summer/Winter Time  . . . . . . . . . . . . . . . . . . . . . . . . . . 35

6

Maintenance and Repair. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

7

Disposal  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

7.1

Disposal of Batteries  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

7.2

Disposal of the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

8

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

1

Designated Use

The 

RAMSES® 813 top

digital timer thermostat and receiver REC 1 868

MHz (single channel) and/or Rec 2 868 MHz (dual channel) are suitable for
wireless room temperature regulation.

The 

RAMSES® 813 top

timer thermostat radio-controls receivers REC 1/

REC 2 by time and room temperature. It may only be used in dry, domestic
environments.

The receiver is to be installed near to an electrical appliance with a maxi-
mum current draw of 6A, e.g. mechanical mixer valve. The appliance is
switched on and off independent of the radio-transmitted room thermostat
control signal. The dual channel receiver enables two appliances to be
switched separately.

Designated use also includes adherence to the operating and mounting
instructions. Any other usage is not allowed. The manufacturer cannot be
held liable for damages resulting from this.

2

Safety Instructions

The connection and installation of electrical devices must
only be carried out by a qualified technician.

The national regulations and respective safety instructions
are to be observed.

Interferences and changes to the device will lead to cancella-
tion of the warranty.

20

ENGLISH

Summary of Contents for RAMSES 813 top Set 1




















Reviews: