background image

3. The check is completed. The display automatically switches back

to the original state.

4.7

Temporarily Changing the Target
Temperature

With this function, you can temporarily change the target temperature
given by the program. The changed target temperature is not saved
long-term. It only remains set until the next temperature change of the
program (e.g. from comfort to lower temperature).

Note:

If one of the programs "Perm. comfort", "Perm. lower" or "Frost"

is set, the temperature change remains until the program changes.

4.8

Early Cancellation, Check or Clearance of
the Holiday Program

If you want to cancel an activated holiday program early, you must
clear the holiday program.

Note:

The setting of the holiday program is described in section 5.1

on page 21.

-

Set display type, (i.e. which information is shown in the dis-
play, also see page 25).

1. Press one of the buttons

or

. The display shows the set tar-

get temperature.

2. Change the target temperature with the buttons

or

.

3. After approx. 3 seconds, the display automatically switches back

to its original state, and the room thermostat regulates to the
changed target temperature.

1. Open the hinged cover and turn the rotary switch to the MENU

setting.

2. With the buttons

or

, select the option

Holiday

. Confirm with

the

OK

button.

3. With the buttons

or

, select the desired option and confirm

with the

OK

button:

-

Check

: By repeated pressing of the

OK

button, you can check

all settings of the saved holiday program one after the other
(start or end time, temperature).

-

Clear

: By pressing the

OK

button, the saved holiday program

is cleared.
You can now program a new holiday program (see section 5.1
on page 21) or set the desired temperature profile (automatic
program) at the rotary switch (see section 4.5 on page 19).

1. Open the hinged cover and turn the rotary switch to the MENU

setting.

2. With the buttons 

or 

, select the option                 Confirm with

the 

OK 

button.

3. With the buttons 

or 

, select the desired option and confirm

with the 

OK 

button:

-

By repeated pressing of the 

OK

button, you can check

all settings of the saved holiday program one after the other 
(start or end time, temperature).

-

By pressing the 

OK 

button, the saved holiday program

is cleared.
You can now program a new holiday program (see chap. 5.1) or set 
the desired temperature profile (automatic program) at the rotary 
switch (see chap. 4.5).

4.9

Party/Eco Program

With the “Party/Eco” function, you can cancel the temperature profile of
the set program for the next few hours (up to 23 hours and 50 minutes).

4.9.1

Setting the Party/Eco Program

1. Press both buttons 

and 

at the same time for approx. 2 

seconds.

2. The display changes and shows the text              and a flashing 

clock. Within 3 seconds, press one of the buttons 

or 

, and 

set the desired period in increments of 10 minutes.

Holiday

.

Check

:

Clear

:

Period

3. After 3 seconds, the display changes and shows the text            

or            Within 3 seconds, select the comfort or lower temperature
with the buttons 

or 

.

4. The display changes automatically after 3 seconds. The display shows

the desired target temperature with the addition “PARTY” (for comfort
temperature) or “ECO” (for lower temperature). The Party or Eco pro-
gram is active for the set period.

4.9.2

Early Cancellation of the Party/Eco Program 

In order to cancel the “Party/Eco” program, press both buttons 

and 

for approx. 2 seconds, until the display changes. Wait another 3 seconds
until the display changes back again. The Party/Eco program is cancelled,
and the addition “PARTY” or “ECO” disappears from the display.

5

Programming

Note:

The P1 and P2 programs are fixed programs ex works, and cannot be

changed.

5.1

Setting the Holiday Program

By setting a holiday program, the temperature profile of the set automatic
program can be cancelled for any period of time.

Note:

With the 

ESC 

button, you can cancel the programming at 

any time.

1. Open the hinged cover and turn the rotary switch to the MENU

setting.

2. With the buttons 

or 

, select the entry                

Confirm with the 

OK 

button.

Comfort

Lower

.

Holiday

.

29

ENGLISH

Summary of Contents for RAMSES 813 top Set 1




















Reviews: