Typical applications
Optical presence detector thePixa P360 KNX
94
thePixa P360 KNX / Master C
RMG 4 U
Standard or customer-defined parameter settings apply to unlisted parameters.
If desired, zone 1 can be adjusted to suit the specific application in thePixa Plug app.
Parameter page
Parameter
Setting
General
Installation height of detector
3.0 m (according to effective
installation height)
Zone definition
1 zone
Zone 1
General zone settings
Operating mode
master
Master operating mode
individual switching
Activate light
yes..
Activate room occupancy
yes..
Light
Function light
switch light..
Configuration type
Fully automatic device
Brightness switching value
500 lx (as per customer
specification)
Light / Time delays
Time delay after motion
1 min (as per customer specification)
Time delay after presence
10 min (as per customer
specification)
Room occupancy
Composition of the persons
counted
dynamic and static
Activate switching
yes..
Number of threshold
1 treshold
Delay time for threshold change
1 min
Number of persons for threshold 1 20 persons (as per customer
specification)
Threshold switch 1
Output value for threshold switch
object 1 at below threshold 1
send 0
Output value for threshold switch
object 1 at greater or equal
threshold 1
send 1
Parameter page
Parameter
Setting
RMG 4 U channel C1… C4:
configuration options
Function
Switching On/Off
Activation of function via
Switch object