The application programme "thePixa P360 KNX"
Optical presence detector thePixa P360 KNX
39
Designation
Values
Description
Send brightness value cyclically
The parameter is visible if "yes.." has
been set at the parameter <Send
brightness value on bus>.
no
The measured brightness value is not
transmitted cyclically.
every minute
every 2 minutes
…
every 30 minutes
The measured brightness value is
transmitted cyclically at the selected
time.
Send brightness value upon change
no
from > 5%
from > 10%
from > 20%
from > 30%
from > 40%
from > 50%
from > 60%
from > 70%
from > 80%
The parameter is visible if "yes.." has
been set at the parameter <Send
brightness value on bus>.
The measured brightness value is not
transmitted depending on a change in
brightness.
The brightness value is sent if the
measured value has changed by at
least the configured value since the
last transmission. This change is
independent of the length of time
taken for this process.
If the brightness remains constant,
the brightness value will be resent on
completion of the configured cycle
time.
