The application programme "thePixa P360 KNX"
Optical presence detector thePixa P360 KNX
38
5.6.2
Light
Designation
Values
Description
Light general
Function light
switching light..
The light is switched or dimmed to a
defined value depending on motion or
presence.
It is possible to dim the lighting to a
specific value without motion or
presence detection. For this purpose,
the parameter <Switch-on dimming
value at no motion, no presence> is
available.
constant lighting control..
The light is dimmed to a constant
brightness value depending on motion
or presence.
It is possible to control the lighting to
a specific value without motion or
presence detection. For this purpose,
the parameter <Brightness setpoint
value no motion, no presence> is
available.
Configuration type
semi-automatic
fully automatic
In "semi-automatic" <Configuration
type>, switching on must always be
carried out manually. It is switched off
automatically.
In the "fully automatic"
<Configuration type>, the lighting
channel automatically switches or
controls the lighting depending on
presence and surrounding brightness.
It is switched off automatically.
Send brightness value on bus
no
yes..
The measured brightness value is not
transmitted.
The measured brightness value is
transmitted on the bus.
A brightness adjustment made in
thePixa Plug app is taken into account
when the value is output.
5
Parameters are visible if "yes.." has been set at the parameter <Activate light>.
