Main Wing
1
P.3
Make sure to glue securely.
If not properly glued, a failure
in fight may occur.
Main Wing
2
completed
Aileron Servo
3
Wing Joiner
8x25x201mm
1mm
Ring
Plywood
1.5mm
3x10x20mm
Bottom View
Pre-glued
1
.
5mm
Please dry fit wing joiner into left and right wing to make sure they fit with the proper
dihedral angle, mark the wing joiner if necessary. Apply epoxy glue to both sides of
all surfaces in contact. Use a stick to apply the glue to inner side of wing joiner sleeve,
and apply the glue to wing joiner before putting them together. Wing joiner not glued
properly will lead to wing failure and plane crash.
A234PO28901305
All manuals and user guides at all-guides.com
