Align the off cut to the new end.
Use a set square to locate the new
holes.
With a 4mm drill bit, carefully drill
through one side of the stay bar tube.
Ensure the staybars are square and
level.
Mark the end loca�ons on the wall.
Remove the Stay bars and the main
panel.
C
D
8
9
SB6 Stay Bar Configuration
Assemble the glass clamps to the stay
bar as shown.
Place the glass clamp over the glass
using the screw and white plas�c
washer provided.
04/06
07/2019 V 2.2
