o
Gearbox will disengage lock.
o
Turn the front knob to disengage the latch.
Erase stored tags
o
Press outside button once to turn on RF reading.
o
Scan a programmed tag.
o
Press button again to enter programming mode.
o
Press and hold button for 5 seconds.
o
All tags but the one used to enter programming mode will be erased.
Red LED: Low Battery Warning
o
If the red and blue LEDs blink alternately when powered on, the battery is below 40% and
should be changed soon.
o
If the red LED flashes rapidly when powered on, the battery is below 10% and should be
changed immediately.
Inner Locking Position
o
The inner mechanism used to engage front knob is driven by an internal gearbox. The
gearbox position (locked or unlocked) is toggled via NFC reading, bluetooth application, by
turning the inside knob, or by actuating the inside button. The gearbox will remain in
whatever position last set by the user. The position of the gearbox sets the front knob to
the locked or unlocked position.
Outside Knob
o
The outside knob will be locked by the inner locking mechanism only when the inner
mechanism is set to the locked position. The outside knob will remain locked or unlocked
based on the toggle position.
Inside Knob
o
By design the inside knob is free to move the latch open or closed at any time independent
of the electronic state. By actuating the inside knob to the open position an electronic switch
