Fan Installation
(continued)
6
Using screws provided with junction box, securely attach hanging bracket to
ceiling junction box. Junction box must be visibly marked as “Acceptable for Fan
Support.” It is recommended that the flat washers and lock washers from the
hardware pack be used for added security. Lift fan to ceiling and set half ball
in the hanging bracket so that the ridge on the edge of the hanging bracket is
seated in the slotted channel in the half ball.
Carefully insert one blade into a rotor slot. Using pan
head screws from hardware package to secure blade
to rotor. Screwdriver and screws pass through oval
holes to access blade and rotor attachment points.
Repeat for 2nd and 3rd blades.
If installing the optional LED light kit, proceed as
described here. Otherwise, skip to Step 6.
Remove lower housing from fan. Set aside the four
screws from this step.
Route 2-pin connector and wires through center hole
of trim ring. Using the same four screws from above
step, attach trim ring to fan body.
3
4
5
hanging bracket
place fan in bracket
