Once wire connections are completed, remove
set screws on outside of hanging bracket,
lift canopy up to cover receiving unit, wire
connections and hanging bracket. Then align
and reinstall set screws on each side of canopy
to secure in place.
8
9
Dimming Selector Switch
The remote handset and wall control ship pre-set for “on/off” operation of the light.
The LIGHT button will turn the light on and off when pressed and released.
To enable dimming function on the remote handset, move the vertically oriented
dip switch down from ON to 1 (or from X to D). On the wall control, move the
right (or lower) dip switch from ON to 2 (or from X to D). Dip switches are located
inside the battery cover of the remote handset and on the left side of the wall
control. See image below.
With dimming enabled, pressing and holding the LIGHT button will increase or
decrease brightness, with the minumum and maximum light levels indicated by
a “chirp” from the receiver.
Universal or Dedicated RF Channels
The remote handset and wall control ship pre-set to a “Universal” or common
RF channel. If you have multiple fans in close proximity, you will want to set the
remote handset and/or wall control to an “Individual” (or unique) channel.
To select the “Individual” channel on the remote handset, move the horizontally
oriented dip switch from ON to 1 (or from U to I). On the wall control, move
the left (or upper) dip switch from ON to 1 (or from U to I). See images above.
Inside remote handset
Dip Switches:
Left side of wall control
Universal or
Individual
Channel
On/Off or
Dimming
To
p
B
ottom
handset
9
