USER GUIDE – MEIDJO
MEIDJO 2.0 - USER GUIDE version A – Septembre 2015
8
11.
Remount the 2 springs
12.
Screw the 2 red knobs with the two washers
13.
Adjust the spring tension and the safety release system. Align the washer between the red knob and the
spring with the line number or the setting you want from 1 to 5. Do not unscrew below setting level 1
during telemark.
Adjust to level 1
Adjust to level 5
(washer and number 1 aligned)
(washer and number 5 aligned)
5.
ADDING THE SECOND SPRING
If you want to increase the power of your binding you can add the second spring.
The second spring has to be slide in the bigger one (black one). The steps to do that are:
•
Unscrew the 2 red knobs and remove the 2 black spring
•
Slide the small stainless steel spring inside each black spring
•
Put the 2 pairs of spring inside the spring box
•
Screw the 2 red knobs with the two washers
