USER GUIDE – MEIDJO
MEIDJO 2.0 - USER GUIDE version A – Septembre 2015
3
3.
DRIILLING THE SKIS
1.
Drilling the skis with THE M JIG
Preparation of the Jig
•
Unlock the tow black knobs
•
Place the shoe onto the Jig
•
Adjust the plates at the shoe size.
•
Lock the 2 black knobs
•
Remove the shoe from the Jig
Placing the Jig onto the ski
•
Open the blocking-jaws by turning the handles
•
Place the Jig so that shoe center line is aligned
with the ski center mark.
2.
Drill with the THE M drilling pattern
Nota : In case you use a printed drilling pattern, check with
a ruler that the length line of 200 mm is correct.
•
Read the instruction of the drilling pattern
•
Check on your shoe the size of the shell in mm
•
Mark on your ski the middle center of the ski and
longitudinal line (on a paper scotch for example)
•
Cut the drilling pattern as shown - Part A and B
•
Mark the line corresponding to the size of your shell
•
Place Part A of the drilling pattern in such a way that
the line of marking (value of the length of your shoe)
is placed on the mid center line of the ski.
