15
Installation Types
This ice maker has been designed for Mobile (free-standing), Enclosed, or
Built-in (sealed) installation.
Mobile installation:
A mobile installation will allow you to install the icemaker free-standing in any
place you desire provided you have access to a water supply and drainage
facilities. You must follow the stated instructions for
a- Electrical requirements
b- Water supply and drain connections
c- Leveling the icemaker.
Enclosed installation:
An enclosed installation will allow you to install the ice maker under a cabinet, or
in a kitchen cabinet provided the required clearance space around the ice maker is
respected. This installation has the same requirements as a mobile installation.
The unit should be placed in the cabinet by sliding it in the cabinet’s opening and
leveled properly.
NOTE: For the Mobile and Enclosed installations you must use flexible water and drain
connections to the water supply and drain. This will allow the moving of the ice maker for
cleaning and/or servicing. Use the water hose and drain hose supplied with the unit for these
connections.
Built-in installation:
When the ice maker is to be built-in, the following additional items must be
observed.
1.
Place ice maker in front of installation location. Remove the feet and place the
unit flat on the floor or on a platform depending on your installation
requirements.
2.
The water supply pipe and drainpipe must be plumbed before connecting to
the ice maker.
3.
Turn on main water supply and tap. Check for water supply connection leaks.
Tighten any connections
(including connections at the valve)
or fittings that
leak.
4.
Pour 1 gallon (3.79L) of water into the ice storage bin to check leaks at all