22
If the ‘Enter Parameters’ box is checked in the Accel Input window, then after the Accel parameters
are stored, the full Parameter entry screen is displayed.
The settings on the Parameter input screen should only need to be put in once unless you make
changes to your hardware. The Controller remembers the settings if you click on the ‘SEND to InTurn’
checkbox.
Note:
New releases are provided in the same type of ‘Distribution Packs’ as the original that you
have installed using this manual. The only difference with an update is that the firmware in the
controller is typically also changed. The process of installing new firmware in a device is called
‘
flashing
’
. It is a fast and easy process taking only a few minutes following very specific step-by-step
instructions which are provided with the new firmware package.
