13
Baud Rate:
57600 8-1-N
Timeout
100
Input top line only
On
<checked>,
Slave Addr
: 1,
#Registers
:
25
,
Holding
<checked>
Output top line only
On
<checked>,
Slave Addr
: 1,
#Registers:
25
,
Holding
<checked>
Update Frequency 60
Click
Apply
before leaving the config screen!
Close Mach3. Restart Mach3:
Test ModBus
Communication with the InTurn™ Controller:
With MACH3 closed, Power up the InTurn™
Controller
Start Mach3 - be sure to use the
InTurn™ Profile.
Click
Function Cfg’s
and choose
Setup Serial ModBus Control
from the drop down.
Click
Test ModBus.
On the next screen, make sure the
Port
is correct and click
Open.
The Status box should say ‘no error’. Click ‘Read’ and a number should appear in the window.
The Status box should still report ‘no error’.
