THE PATIO & DECK CLEANER
The Patio & Deck cleaner is ideal for cleaning floor & wall surfaces of different materials. It is
compatible with wood, plastic, concrete, natural stone and tiles. The extension lance,
provides you with extended reach.
Detergent can be entered into the large cap positioned on the top of the cleaner. To release
detergent, adjust the valve positioned on top of cleaner. Close once detergent is no longer
required.
Tips:
We recommend the surface is swept prior to cleaning, to avoid damaging the high
pressure nozzles.
The cleaner is not recommended for scrubbing at surfaces. Guide the
cleaner over the pre-prepared surface, without effort.
STARTING AND STOPPING THE PRESSURE WASHER
CAUTION
:
Do not run the pump without the water supply connected and turned on.
•
Connect the garden hose.
•
Turn the garden hose on then squeeze the Trigger to relieve air pressure. Once a steady
stream of water appears, release the Trigger.
•
After ensuring the ON/OFF Switch is in the OFF (O) position, connect the pressure
washer to the power supply.
•
Turn ON (I) on the switch to start the motor.
•
To stop the motor, release the trigger and turn the switch to OFF (O).
NOTE: The pressure washer may be on and the system may have pressure even when the
pump and/or motor cannot be heard running. Always use caution around the pressure
washer.
MOVING THE PRESSURE WASHER
•
To move the pressure washer:
•
Turn the pressure washer off.
•
Point the Trigger Gun in a safe direction and pull the Trigger to until all the water
pressure has been released.
•
Stand to the rear of the machine
•
Tilt the machine toward you until it balances on the wheels, then roll the machine to the
desired position, using the adjustable transport handle.
