OPERATION – PRESSURE WASHER
APPLICATIONS
You may use this product for the purposes listed below:
Cleaning boats, bicycles, motorcycles, motor cars, outdoor furniture, grills, guttering, patios,
steps, decking.
ON/OFF SWITCH
This switch turns the pressure washer on and off.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides added control of the spray wand and
helps reduce fatigue.
TRIGGER WITH LOCK-OUT
Pulling the trigger releases a stream of water for high pressure cleaning. The lock-out
provides protection against unauthorized use.
USING THE TRIGGER AND LOCK-OUT
For greater control and safety, keep both hands on the trigger handle at all times.
•
Pull back and hold the trigger to operate the pressure washer.
•
Release the trigger to stop the flow of water through the nozzle.
TO ENGAGE THE LOCK-OUT:
Push the lock-out button to the left on the trigger until it snaps into place.
TO DISENGAGE THE LOCK-OUT:
Push the button to the right on the trigger.
For the most effective cleaning, the nozzle end of the spray wand should be between 8 in.
and 24 in. from the surface to be cleaned. If the spray is too close it can damage the
cleaning surface.
OPERATING THE PRESSURE WASHER
Use only detergents designed for pressure washers. Many detergents may require mixing
prior to use. Prepare cleaning solution as instructed on the solution bottle.
WARNING
Hold the trigger handle securely with both hands. Expect the trigger handle to move when
the trigger is pulled due to reaction forces. Failure to do so could cause loss of control and
injury to yourself and others.
