THE GILBERT HALL American Flyer, Operating And Assembly Instructions Manual

Page: 45 / 66

type bucket.
B y
just pressing a button on the Control Box you drop this
bucket onto the coal pile with open jaws Press another button, the jaws
snap shut. The load is hoisted to the top of the tower and a moment later the
coal is rattling down the chute to the waiting car below. Endless hours of fun
can be had and the coal is clean, will not dirty the hands or mother’s rug.
To Hook up the Seaboard Coaler see Fig. 36.
After unpacking the No. 752A Seaboard Coaler, untie the string which
holds the chute and track in place for shipment, then lift the track and truck
assembly forward and insert the ends of the formed wire brace into the holes
in the side of the upright. See that the cord is running through the various
pulleys.
Now place the Coal Loader in the desired position in your track layout
so the chute is over the track and coal will fall into the car below.
See diagram and hook-up as follows:
If you
are using a transformer.
Connect the
BLACK
wire to the
BASE POST
on the transformer.
Connect the
YELLOW
wire to the
15 VOLT POST
on the transformer.
44