Place a small amount of coal in the car, run the train around the track
stopping it so that the contact is on the special contact rail. Press the button
and the car will tilt, allowing the coal to drop into the tray. Release the button
and the door will close.
T o add much more fun and realism to the train, the cars can be loaded
by Remote Control by using the
No.
752A Seaboard Coaler.
No.
714
Log Unloading Car
Place the car on the track, place the three logs on top of it, then run
the train around the track, stopping it so the contact shoe is resting on the
special rail. Press the Control Button and the platform will tip, unloading
the logs. Release the button and the platform will drop back in place. See
Fig. 26.
One of the greatest play value pieces of train equipment is the
No. 751A
Log Loader which will load logs onto the above car by remote control, and
the log car can also be used to dump the logs onto the log loader for reloading,
No. 718
Mail Pick-up Car
Directions for Wiring to a Transformer
The
No. 713 Special Track Section is used to operate the
No.
718 Auto-
Connect the wires from the transformer to the track terminal as described
Connect the
LONG YELLOW
wire from the
Terminal Post
on the
Connect the
SHORT YELLOW
wire from the other clip underneath the
matic Mail Pick-Up Car and wires are connected as follows:
on the
No. 690 Track Terminal envelope.
No.
713 Special Rail Section to a clip underneath the Control
Box.
Control
Box
to the
15
Volt
Post
on the transformer. See Fig.
27.
30
Summary of Contents for American Flyer
