PIZZAGRILL
CLEANING THE PIZZA STONE
Always make sure the stone has cool down before removing it.
Use a nylon spong to remove food crumbs.
Never use soap. Cordierite is porous and will soap will soak in it.
To remove staines, use a solution with water and baking soda. Rinse well after.
THE STONE MUST NOT
soak in water . Do not soak the stone in water for an extended period of time. The stone
is a sponge and absorbs moisture. Too much moisture will make it difficult to dry.
wash in dishwasher
be put in the kitchen oven with a self cleaning program..
HOW TO USE IT ON THE GRILL
Place the stone in the grill and turn on heat.
Preheat the grill to 250 – 300°C for 15-30 minutes.
Bake the pizza in the size you like.
Put some flour on the stone, before placing the dough.
Close the grill door. Normally it takes 7-10 minutes to bake a pizza.
Pay attention to avoid the pizza getting burned.
The pizza stone must cool down before it being removed from the grill.
Always use a pizza peel/spade to remove the pizza from the stone.
MAINTENANCE OF PIZZA STONE
Before using the stone for the first time, rinse the stone with water.
1. DO NOT USE STONE OVER ON AN OPEN FLAME
2. AVOID EXTREME TEMPERATURE CHANGE TO THE STONE. DO NOT PLACE FROZEN
FOODS ON A HOT STONE
3. THE STONE IS FRAGILE AND CAN BREAK IF BUMPED OR DROPPED
4. PIZZA STONE IS VERY HOT DURING USE AND KEEP HOT FOR A LONGTIME AFTER
USE. PLEASE USE IT UNTIL
IT HAS COOL DOWN
5. DO NOT COOL THE PIZZA STONE BY WATER WHEN THE PIZZA STONE IS HOT
6. AFTER CLEAN THE PIZZA STONE WITH WATER, PLEASE DRY THE STONE BEFORE USE
16
Maintenance
Summary of Contents for FCC-G-18400-00
Page 7: ...PLACE THE PIZZA STONE PLACE THE PIZZA GRID 3 4 7 Assembly ...
Page 8: ...PIZZAGRILL Assembly GREASE PAN BOTTOM PANEL SHOULD BE CLEANED REGULARLY 5 6 8 ...
Page 9: ...CONNECT THE GAS TANK REMOVE THE LID CAREFULLY BY LIFTING IT LIKE IMAGE SHOWS 7 8 9 Assembly ...
Page 17: ...17 Troubleshooting ...
