Lighting Instruction
LIGHTING INSTRUCTION
1. Open the grill door and make sure the knob is on
the OFF position.
2. Push down the knob and turn the knob
anticlockwise to HIGH position, then the burner
could be lit. If the burner does not light, turn off
the knob and wait for 5 minutes then repeat this
process.
3. Adjust the heat by turning the knob to the High /
Low position.
4. To turn the barbecue OFF, turn the cylinder valve
or regulator switch to the “OFF” position and then
turn the control knob on the barbecue clockwise to
the “OFF” position.
IF THE GRILL WILL NOT LIGHT USING NORMAL OR
MANUAL LIGHTING, REFER TO THE TIPS SECTION IN
THE TROUBLESHOOTING MANUAL, OR CONTACT
YOUR DEALER.
MATCH LIGHTING
If the grill will not light, try the following procedure for
manual lighting. Use a long match or lighter.
1. Open the grill door and make sure the knob is
on the OFF position.
2. Place a match into match holder chain and
fire the match, then
put the match into the burner then push down
the knob and turn the knob anticlockwise to
HIGH position.
13
Summary of Contents for FCC-G-18400-00
Page 7: ...PLACE THE PIZZA STONE PLACE THE PIZZA GRID 3 4 7 Assembly ...
Page 8: ...PIZZAGRILL Assembly GREASE PAN BOTTOM PANEL SHOULD BE CLEANED REGULARLY 5 6 8 ...
Page 9: ...CONNECT THE GAS TANK REMOVE THE LID CAREFULLY BY LIFTING IT LIKE IMAGE SHOWS 7 8 9 Assembly ...
Page 17: ...17 Troubleshooting ...