5.7
REMOVAL & RE-FITTING THE FUEL-BED PEBBLES
Remove the glass panel as shown in on pages 54-55 before attempting to
remove or replace the logs.
5.7.1
Fit the pebbles to the burner tray as shown below in figure 24, do not fill
the flame ports in the burner with pebbles.
Fig. 24
5.7.2
Fit the vermiculite material into the burner ports as shown below in
figure 25.
This material must be fitted in an even layer to ensure
correct operation of the fire.
Fig. 25
5.7.3
If required, fit the glow fibre material over the flame ports. To do this,
seperate into short strands and place randomly over the flame porting
area as shown on previous page in figure 17.
This material is only
supplied to improve flame aesthetics and is optional to install.
Vermiculite to be placed over burner ports across length of
burner as shown below
62
