5.5.3
Remove the 5 off securing screws and glass panel retaining bracket
that are located on the top underside face of the combustion chamber.
behind the canopy. See figure 10 below.
5.5.4
Lift the glass panel vertically to release from the bottom retaining
channel and then tilt forwards as shown below in figure 11/12 to
release.
Fig. 11
Fig. 12
55
Glass panel
Glass Panel
Retaining
Bracket, secured
by 5 off screws
Combustion
Chamber
Glass Clamp
Glass panel
Bottom Glass
Retaining
Channel
Glass Clamp
Glass panel
Tilt Forwards
Bottom Edge
Fig. 10