A
B
Twin xl Instructions
When two side
-
by
-
side bases do not align
On the higher base of the two, use a wrench to turn both nuts counterclockwise to lower the angle
until the higher angle base matches the level of the lower angle base.
Using one remote to
control side
-
by
-
side bases
The bed base is designed to allow two Twin XL bases to
function together as a King base. You can use one
wireless remote to control two side-by-side bases by
synchronizing the remote with the control box of each
base. (See Step 7 of Setup and Installation.)
Using two remotes to
control side
-
by
-
side bases
You can synchronize two wireless remotes with two
side-by-side bases so that either remote simultaneously
controls both bases by: (1) synchronizing (A) Master
Remote with the control boxes of both bases and (2)
syncing (B) Clone Remote with (A) Master Remote by
following the steps below.
Press the HEAD DOWN and FOOT DOWN buttons on
(B) Clone Remote. The remote flashlight will turn on for
10 seconds. Meanwhile, press the HEAD UP and FOOT
UP buttons on (A) Master Remote. The syncing process
is successful when (B) Clone Remote flashlight begins to
flash. Now, either remote will simultaneously control
both bases.
To desynchronize (B) Clone Remote from (A) Master
Remote, simultaneously press the SPEED UP and
INTENSITY UP buttons on (B) Clone Remote. The
desynchronizing process is successful when (B) Clone
Remote flashlight stops flashing.
HIGHER ANGLED BASE
4
