Setup and Installation
Important: We strongly recommend two able-bodied adults set up and assemble this product.
Figure 2
Step 1
Check and verify all parts are included before discarding
any packaging materials.
All electronics and components that need to be installed
are located in boxes under the bed base or attached to
the frame.
A) Wireless Remote (1)
B) Control Box (1)
C) Transformer with emergency battery backup (1)
D) Legs (4)
E) Power Cord (1)
F) Mattress Retaining Bar (1)
NOTE FOR KING ADJUSTABLE: King adjustable
has six legs and additional bag of hardware for the extra
step on page 6.
Step 2
With the help of your able-bodied assistant, place
adjustable box on floor with arrows pointing
downward.
NOTE FOR KING ADJUSTABLE: Turn to page 6
now for special instructions.
Step 3
Connect (C) Transformer to (B) Control Box. The
Control Box is the black box attached to the bottom of
the bed frame. Extend the control box extension cord
from (B) Control Box and attach it to the short electrical
output cord on (C) Transformer. Plug (E) Power Cord
into (C) Transformer. (See Figure 1.)
Step 4
Install (D) four legs firmly into the base of the frame.
The legs screw into the threaded holes in each corner of
the frame. (See Figure 2.) Do not overtighten.
Step 5
Locate the (A) Wireless Remote and insert 3 AAA
batteries (included).
F
E
E
B
C
C
E
D
C
F
A
B
1
Figure 1
E
B
C
Figure 1
F
E
B
C
